7's Workshop of Weed

today’s flush and total harvest. there’s about 15 or so caps missing from the last pic, those are being used to make prints and then eventually syringes

7 Likes

:heart_eyes: Looks like I need to come visit :rofl:
Are these still Golden Teacher’s or something else? I didn’t quite understand it from the previous posts. Looking damn good!

2 Likes

This particular harvest is the result of my third set of jars from my first attempt. First attempt was Treasure Coast and Amazonian, but also came with a free “Fiji” syringe. My second attempt was with Golden Teacher, but that all failed and I was left with nothing just as lockdown began. I managed to harvest like 3g from my Fiji grow and used some of the caps to make my own syringes and start a line of agar. One of those syringes I used to make new jars and that’s produced this.

I have 12 other jars with cuts from the agar that was made with a tissue sample from the original tiny harvest

It’s been quite the roller coaster

4 Likes

oh damn! Yeah quite a ride for sure from the sounds of it! I haven’t tried those fiji’s before, been some years I last looked at spore’s though. PE and GT were all the rage back then and pretty good.

Is there any strain you prefer over the others or still figuring that out?

2 Likes

Still very new atm. Just spawned my first rye grain jars today. This is the farthest i’ve gotten so far, been spending most of my time trying to cultivate enough MYC to I dont need to buy any more syringes. In the future I may do a strain hunt but I think right now with the Fijis it should do me for a while. I think Albino Penis Envies are the rage atm, seeing lots of people in various sites growing APEs, they’re supposed to be a lot more potent compared to normal cubes

3 Likes

Yeah that’s what I’ve always heard, APEs are the most potent… I always liked the golden teachers but they were always a pain to keep sterile and not get contaminated. I think we were doing vermiculite/agar combo but not positive since it’s been so long. talking 2003 or so :rofl: Definitely didn’t look like your current jars. I think the columbians were the one’s we had the most success with but also like, the least potent :upside_down_face:

I need to get back into this. I love a good vision quest once a year or so but I think I’m just gonna have to live vicariously through you for the time being :stuck_out_tongue_winking_eye:

3 Likes

Literally the only reason why I got into this is because its been impossible to buy any where I live. I managed to get some last year around august time but the dude who I bought it from moved away to start a family so I was like eh fuck it ill just grow them myself. It’s been fun for sure, once I got past the frustrating stage of dealing with contam, I found a good technique to stay sterile and its been working so far :crossed_fingers:

3 Likes


Spore prints made and now the harvest can go into the dehydrator. It’s taken about 4 months or so to get to a proper harvest beating my almost 1 year of attempts at growing weed to get acceptable buds :laughing:

5 Likes

Im in the exact same boat mate, the last guy i had any dealings with turned out to be a huge scammer that sorted me out good as a one off then dissapeared and scammed 10 other people or something

2 Likes

Ugh that’s so annoying. I’m fortunate that i’ve never been scammed, but then again I only bought weed for about a year before I started growing instead. I definitely don’t miss the days of waiting for 2 hours round the dealers house listening to him rap whilst we wait for some big dodgy dude to show up with an O of skunk wrapped up in clingfilm :joy:

4 Likes

Hahahahaha yeah i did that once then was introduced to a lovely guy that would meet and sort you out in seconds then offer a smoke or a stroll round the park nd a nice chat about the latest game of thrones episode or something. The clingfilm wrapped or in a sandwich bag and in a sainsbrys bag seems to have never really stopped though. :rofl:

Edit cause i feel like im posting a lot, those prints and shroom look good! I ot two good big prints like that off mine after failing with the mini heads that seemed to shrivel up into a balland dump on the inside of themselves

2 Likes

I haven’t really done a proper update on Gen 13 (“the hunt for the lemon”) so here we go

Mission: Find a lemony strain. Learn to successfully clone. Possibly try a SOG? Keep the best performer whilst I try the next set of beans

So far the grow is going fine. I on the fence about whether or not to top these plants as to allow them to grow their natural structure to make cloning easier. Im at the point where if I were to top, I would, down to the 2nd node.

The structures of the plants is generally good, A, B, and C are still performing well, C is definitely the worst performer out of the top 3, could possibly be replaced by E.

Planted: 2020-04-25
Popped after 4 days and germinated for 6 days before transplanting into small pots
Currently 15 days veg

Nutrient lineup is the same as all my previous grows, with the addition of Liquid Silicone by Ionic.

  • Canna coco A&B - 2.5ml/l
  • Canna Rhizotonic - 3.5ml/l
    • A note about rhizo, been reading that this is just a glorified seaweed concentrate, and i’m currently running low and using Seasol (which is a seaweed concentrate) as a replacement to Canna Boost anyway, so I may just let the rhizo run out and carry on using the Seasol to see if there’s any change
  • Vitalink Calmag - 2ml/l
  • Seasol - 2ml/l
  • Ionic Liquid Silicone - 1ml/l

Mixing 10L and EC ranging currently between 2.1-2.3 with a pH of 5.5-5.7.

Was reading that you should pre-buffer your water with silicon for a few days before mixing to let it dissolve properly. I tried that at the start but found that it never really dissolved until it was properly pH’d regardless of how long it was left before mixing (you can see this product easily because its cloudy when it gets added) so now I just add the silicon first, then the calmag, rhizo, seasol, A&B in that order.

They were all transferred into 16L pots 4 days ago have been watering 2L of mixed nutes every other day. I know some people water their coco multiple times a day, but I find that every other day is OK because the coco stays pretty wet as it is. When the roots are more developed, though, I will start watering every day.


Plant A. Growing well, Some tips are starting to show N toxicity, but generally fine


Plant B. Very well performer so far. Slightly smaller than plant A.


Plant C. Tacoing? strange, possibly more sensitive to the heat than the others. Also signs of N toxicity.


Plant D. Big signs of N toxicity, possibly more sensitive because of genetics?


Plant E. A little stunted/lagging behind the others. Little sign of N toxicity, but generally the better performer of the bottom 3

Will have to pull back on the nitrogen next water. I usually mix A and B in exact proportions, is it even possible to reduce the A and keep the same amount of B? A has the more N ratio than B does. Will need to research.

9 Likes

Just spawned the last 6 jars (I have 12 490ml jars in total)

This grow I have done 2 lots of 6 jars, inoculated a week after each other.

First I break up the cakes in a large freezer bag. Most people just break it up and mix direct in the tub, but I find this easier to get a thorough mix

Add the coco + vermiculite + gypsum mix into the bag at a 1:1 ratio (1800ml to 2000(ish)ml)

This sub I made with 650g coir brick, 2L vermiculite, 1/4 cup of gypsum, and 4L water. Ended up making about 10L or so of sub, so will need to adjust that in future.

Lining the bag is by far the hardest bit… My tubs are small and its fiddly. I may buy a roll of polythene and use that instead of bin liners.

Add the mixed spawn

Top off with a layer of coco + mist.

7 Likes

If you can a smaller short tub the height of your substrate inside is supposed to make it easier as it holds the bulk and means you can pick up and then it out easier, otherwise if heard just paint the outside?

Do you soak them in the tub between flushes or pop them out as a full cake?

2 Likes

Possibly. I quite like these tubs, I plan on using only 4 jars each cycle anyway as I can only fit 4 at a time in my pressure cooker, plus they fit in my little indoor tent very nicely (2 on each shelf means I can fit 6 tubs at once)

Doesnt stop side pinning unfortunately. The idea of the liner is that it will adjust with the size of the substrate as it loses water.

The current BRF sub I soaked in a separate tub and then put back in its original container. Didnt fancy messing around with the liner and water, plus the sub should be pretty solid at the point it fruits

3 Likes

If your in America dollar general sells floral snips for a dollar

4 Likes

They actually look like the ones I ended up getting. They were much much better when trimming the latest harvests. Much easier to clean also.

1 Like

I’m trying to spread the word on them before there all gone there on the same level of quality as a 15 dollar pair

3 Likes

Been trying to find a good way to steam dry my grain after boiling, so far I had been taking to paper towels to dry them in layers, but was such a pain and waste of paper towels. Today I needed to boil some more grain and I had a eureka moment when I remembered I had a cheese cloth from when I made cannabutter, but the problem was, what could I put the cloth on? needed some kind of hard grid to support the cloth but also allow water through it, and then thought about my ironing board. Threw the cloth (folded once) on top and it worked PERFECTLY! easy solution without having to build a drying rack with mesh and what not

7 Likes

:star: :star: :star: :star:
That’s thinking outside the box!!
well done.

Cheers
G

2 Likes