Augvape VTEC1.8 Box Mod:$34.99 (Code: VTEC )

The Augvape VTEC1.8 Box Mod, recently launched by Augvape, is very chic.
In fact, the design of Augvape VTEC1.8 Box Mod is inspired by the Honda Type R B18C-R. Type R is the abbreviation of Type Racing, which is the super sports car in the Honda series, and the B18C-R is the red head engine of the Honda Type R.

Compared with the traditional packaging form, VTEC200W’s packaging design is very elegant. From the design of the packaging style and the color of the packaging, we can see the thoughts of the manufacturers. Through the front and back of the pvc board, we can initially appreciate the charm of Augvape VTEC1.8 Box Mod.

The size of the VTEC200W is 87.54529.2MM. As a dual-powered mod, the internal structure has been compressed to the extreme, so it does not feel like holding hands in the hand. With a weight of 255 grams after the double 18650, it will feel a little falling like the other doubles. Although the appearance is slightly elongated, it does not have a destructive effect on the shape of the face. Still quite bearable. In addition, the workmanship of the product is also very fine, and did not find too obvious flaws.
VTEC200W is made up of two zinc alloy cover plates, so it can clearly see the stitching marks, and it is obvious. Therefore, some players will mistakenly think that they are picking up their hands. For structural reasons, it is necessary to adjust the method of holding the grip during the operation. The correct grip method is not only comfortable but also avoids the influence of the stitching marks on the opponent.

“Since the method of operation has been changed, how can I use it for ignition?” “Yes, anyway, I can’t use another hand to ignite.” This question is well mentioned, of course, the designer also answered well: “Press it and press it boldly.” That’s right, in order to adapt to its grip, the Augvape VTEC1.8 Box Mod ignition key is designed just at the thumb press and where the power is marked (the LED light is fed back when the battery is touched). This highly concealed design has to be said to be a designer’s cleverness, but the position is slightly higher. If it falls to the right side of the turntable, the pressure will be smoother. Especially for players who like to hold with a little thumb, it is easier to touch.


The VTEC200W not only has a smart design of the ignition key, but also a unique design of the ±key. Through the ±indicator on the screen protector posted on the middle panel, I believe that many players have seen the position of the ±key, yes, this pulsator-style turntable is the ±key, only this will be used The design style is primarily intended to maintain a high degree of consistency with the B18C-R. The specific use method is as follows: push up to + button function, push down to - button function. Need to be reminded: Do not use it as an ignition button. When you first start using it, you will feel less comfortable. When you are familiar with it, you will find that it is much more convenient and quicker to adjust than traditional buttons.
The USB charging interface is designed at the bottom of the panel. In addition to the firmware upgrade, it can also charge the host at the right time, and support the balance charge, complete charging for about 5 hours. At the same time, it supports the side-by-side electronic cigarette charging function. The design on the back is similar to the front, with the black panel only as a decorative feature.

The 510 interface design on the top of the VTEC200W is also distinctive. As can be seen in the figure, the upper anti-scratch disk has a large area and is slightly convex, which can well protect the atomizer from wearing on the top paint surface of the main machine. The anti-lock pattern on the top is very characteristic.

Compared with the ignition key and +/- button design, the battery cover design of Augvape VTEC1.8 Box Mod is more traditional. The slide type is open, and the internal positive and negative signs are given. The metal contacts are made. After gold plating, the cover is tightly attached to the main unit after the battery cover is closed.

1 Like

Augvape still makes stuff? Thought you guys gave up after the merlin and boreas. Shoulda let roxy (i believe her name was) keep designing your gear bc this is awful.
Edit: sorry see your a sponsor but it’s true.

1 Like

@vapeciga Welcome to OG.

These e-cigarettes devices are not my cup of tea because I’m not a vape bro. So I’m wondering if you make a dab or dry herb attachment for this product? If not you may want to look into doing so, even if it’s an adapter for other brands attachments.

Also does this product come with the batteries? I mainly avoid these devices because I have to source the battery’s which tosses me to the wolves and forces me to wade through the shit of Chinese poorly designed and built batteries that have the potential to blow up and cause injury.

Thanks
50State

2 Likes

I also would be very interested if you made a dab tank thing or a vaporiser bit. Or a tank with a super strong coil that could deal with the abuse the oil does to them.

2 Likes

You can buy a dry herb tank that will screw onto the top. This is a mod that comes without a tank.

That should work with it

1 Like

best tank for oil imo https://m.dhgate.com/product/longmada-motar-atomizer-vaporizer-wax-quartz/409055682.html
they have replacement coils also

2 Likes

I use one of these with a high CBD low THC strain and it works well for the price.
https://www.ebay.co.uk/itm/TFW-PATHFINDER-V2-Dry-Herb-Vaporizer-2200mAh-Mesh-Filter-Vape-UK-STOCK/303040937738?hash=item468ea5bf0a:m:mERc0U4cxlEtkZ3TXXupwrg

There are many kinds of e-liquid for the products.What’s more, our battery is worth purchasing, which is of high quality.

Sure, we are selling on.The appearence is chic and portable.

Sure, we can make a dab tank in the next passenger. I hope you will be interested in it.

They can match with each other. A great mod and a better atomizer.

1 Like