Geekvape Aegis Boost Vape Pod Mod Kit

The 25mm all-in-one 510 interface on the top of the host machine, with gold-plated elastic electrode, can improve the conductive efficiency. With good elasticity, the electrode protrudes, and the atomizer with short electrode column will not be unable to sense the atomizer.


Took five holes is the USB interface, in order to ensure the effect of waterproof, dustproof, USB interface seal over here, it need to open it to use, in order to ensure the effect of dustproof, waterproof, charging at any time apart, is not recommended to recommend the use of system upgrade, so there is no configuration data line, randomly select a data line and can connect to a computer system upgrade.
The operation keys and the display panel are very beautiful, with solid workmanship. The ignition key is raised and the color is obvious, while the adjustment key is basically parallel to the screen. The adjustment key is marked + and -, which cannot be pressed wrong.

Display is simple, clear, from the top down is the mode, power, electricity, resistance, ampere, suction port number.

The output mode is complete, supporting power mode, NI temperature control mode, SS temperature control mode, TI temperature control mode, TCR temperature control mode, VPC custom curve power mode, full power mode.

Button sensitive, strong feedback, especially 0.015 seconds of instantaneous ignition, passion burst, enjoy the smoke pleasure.

The screen is already bright, say operation, it is water operation, also can test waterproof effect.
Continuous ignition key for 5 times start or shut down

The continuous ignition key enters the setting state three times
Press the ignition key with the + or - key to adjust the screen brightness
Press the + and - keys on the lock screen
After 3 times of continuous ignition, press the ignition key to move the cursor to the COIL, press the - key to lock the resistor, and then press the - key to unlock
After entering the setting state for 3 consecutive times, press the ignition key to move the cursor to the PUFF, press the + key to reset, and then press the + key to restore

VPC custom curve power mode this power output is actually small make up personally like, P1 to P5 five gear, after ignition power output from 1 to 5 curve output, the time between each gear is about 1 second, explosive force? Persistence? Of course, it’s very entertaining, it’s very playable.

3 Likes