Issues with Blumat Setup for Indoor Grow

Sick Plants & Problems
1

Currently have a Blumat setup (5 plant drip system). There are four 1 gallon pots and one 3 gallon pot. Followed all the instructions and have been fine-tuning the last 2 days.

The four 1 gallon pots are doing fine.

I noticed today that half of the 3 gallon pot was completely drenched with a massive amount of water in the runoff tray. I lifted the pot and was able to tilt it sideways and have more water flow out.

Anyone experience this issue before? What is the best solution?

1 Like
2

Could be some air in the system, check this out … :sunglasses:

Blumat Tips and Trouble Shooting

2 Likes
3

Thank you @George

Sounds like a run-away. I’ll check this one Blumat and possibly refill.

3 Likes
4

Also check if there’s aeration against the ceramic. If there is it cause a false dry spot and will drain the res. To fix it remove the stake, fill the hole with aeration free media, and reapply the stake.

3 Likes