Got a new build in progress and figured i'd make it have it's own thread. All grows conducted in this cab once finished will be in my normal Jelly's Cab Adventures thread.
So, I need a veg/clone setup. Knowing i'm eventually converting my 2x3x3 to ebb and flow, I feel like DWC will transition okay into E&F.
- Complete automation. (Pretty much gonna be running the exact same sonoff gear as @Colanoscopy)
- DWC 12 site System by @Roux
- AC Infinity Cloudline T4
- Megacrop for nutes.
- Remote viewing capabilitys thanks to grow room cameras.
- 200w Timbergrowlights 2TL but i'll have to modify the frame to fit in my cab. I'm going to add some solstrips as well.
So, Let's skip straight to it. The top with the hump is leftover from my vape shop. I still have another 3ft section even after this.
It's 28" (basically) edge to edge. This gives me 27" inside. (1/2" plywood walls)
Not my best cuts, but it'll do.
Close enough. I'll fill the gaps with caulking before I paint.
So, I wanted the tote pretty much to be the floor. Since it'll be on legs, this is easily accomplished. I placed the runners first, to find my width. after that, I got the depth adjusted with a 2x2 and two strips I cut from the wall pieces. Fits very tight but works just as intended. I don't think I'd HAVE to support the bottom, but i'm going to anyways.
Fits nice an tight.
I'm almost outta steam and I got to water the monkeys tonight... so that's all I am doing on the cab today.
Edit: The reason I decided not to go exactly the same size as my first cab, is because I'm almost outta wall. This will fit in the space that is left without clogging up the room too bad.