Nominal looks to be 350ma with 850ish the max id go which is 2.9 to 3.2v roughly respectively.
id wire them one of two ways with how i know some drivers are
either 4 parallel chains of 7 in series which would require 22.4v or round up and say 24V which is common for some driver and an amperage up to 3.5a or 4a max (xlg-100-24) or similar driver
or 7 parallel chains of 4 in series which is 12.8v or so and 6a or a bit more so a driver capable of say 13v and 7a which you may fine some “12v” driver capable of that.
Not quite it will push the set current through the smallest chain it wont detect it, and like lt fry it in the process if too much