The Best TC Mod: Smok Mag TC Box Mod 225W Right-hand Edition

Although the new TFV12 Prince Prince atomizer in the pack brings many new improvements, the MAG is so eye-catching that the focus is on the MAG. At a time when the square box has made people tired of visual, the launch of such a strange mainframe, is too eye-catching.

Let’s take a look at the measured data first. The measured three dimensions of the host are: 91.5mm long, 65mm wide and 31mm thick. Because of the abnormal design, it is not easy to directly compare the three dimensions with the square box.

In terms of weight, the net weight of the main engine is 263 grams, and the working weight of the two VTC4 18650 batteries is 353 grams, which is 111 grams more than the light and portable SMOK ProColor dual-electric main engine, which is a little bit pressing, the subsequent dismantling link to see where the value is.

The front of the MAG is the pistol body shape, which is also the nickname of the pistol. The front center is embedded with a square screen of about 1.2 inches, using the same hd color screen as the ProColor host, showing a very delicate and clear display. Black background color and gun stock of black acrylic decorative board integration, very beautiful

There is a round button in the upper right corner of the front, which is the release button of the battery compartment. Pay attention to the use of do not arbitrarily press, so that the main engine will immediately shut down due to power failure, restart need to restart within 2 seconds by pressing the ignition button 5.

The +/- adjustment key is designed at the bottom of the front screen, about 1mm higher than the surface. It is all made of metal. It feels good to press and adjust. The MicroUSB data port, which is designed below the +/- key, can be used to equal-charge the built-in battery and upgrade the host firmware in the future.

The back and front of the main engine are the same shape, the top also has three groups of 6 cooling holes, ergonomic groove design, the side of the streamline rounded transition processing. The main body is decorated with a carbon fiber sticker to make it look classy. The product logo is printed below. The little black block in the upper left corner is the lock block for the front magazine release button.

Therefore, when holding it in the hand like the following picture, the thumb has a comfortable groove area, the forefinger has a comfortable crescent area, and the remaining three fingers also have a special rest area, so that the handle is very comfortable, plus the edges and corners are rounded processing, the feeling in the hand is much more than the general square box to stick to the hand.