This atomizer is the second generation of large-volume, high-intake, dual-injection RTA atomizer produced by GEEKVAPE, the Discount Code: ZEUSX. Compared with the previous generation GEEKVAPE atomizer, the electrode base, the atomization chamber space and the atomizer diameter are increased, and the air passage structure is optimized, and the heating wire is increased from single to double.
Start disassembling, loading and introducing one by one.
The atomizer is made of transparent acrylic box and plastic packaging, and has a gold-opened ribbon for easy unpacking.
The characteristics of this atomizer are illustrated in orange-red text in the instructions on the back of the package:
1, soft resistance & excellent taste
2, the upper air intake structure can ensure no oil leakage from top to bottom
3, perfect compatible with dual-issue, single-shot structure
At the same time, a laser anti-counterfeiting verification sticker is attached.
After unpacking the family portrait, there are nebulizer body, 810 drop nozzle, 510 drop nozzle, 510 adapter ring,
Two heating wires, a number of rubber rings, spare set screws, spare glass bins and small screwdrivers. After disassembling the atomizer body, it is divided into a glass bin, an electrode base, an air inlet atomization bin, an air intake adjusting ring, an upper cover and a drip nozzle.
The three inner diameters of the dropper are from large to small, and the smallest one is the 510 interface, which needs to be used with the 510 adapter ring.
Moreover, the problem that the adapter ring is inconvenient to take out in the first generation product still exists, and it is necessary to remove the upper cover and eject it from the reverse side.
In addition, the rubber ring of the 510 dropper is fine, and the drip nozzle can not be fixed very well, which causes the drip nozzle to be loose and easy to slide out. I found two thick 510 aprons from the stock. This hopes that manufacturers can improve in the future.
The upper cover of the GeekVape Zeus Dual RTA is designed with a snap, and the upper cover can be opened by rotating 90 degrees.
From the details, you can see that the buckle is designed with a slope to facilitate the tightening of the top cover.
The two heating wires included in the package are loosely wound braided yarns, which are woven with more than ten very thin heating wires.
This type of silk is generally more common in mouth-feeling atomizers. GEEKVAPE should be used to indicate that the atomizer is known for its taste.
The the GeekVape Zeus Dual RTA adopts the air intake structure on both sides. In addition to the lower intake air, in addition to the oil storage bin, the atomization bin, and the flue, an inlet structure is added in the glass bin.
Directly leading to the diameter of the entire atomizer up to 26MM, the following from left to right is KFP, 24 Siren2, Supervape and Zeus 2 generation, there can be an intuitive comparison.
I usually suck a lot, I always think that Supervape is a huge existence, but the second generation of Zeus is obviously bigger than Supervape.
In addition, it needs to be explained that the desire mad mod has protrusions on both sides of the top, and the largest atomizer diameter that can be accommodated is 25MM.
The diameter of the GeekVape Zeus Dual RTA glass bin is 26 mm, but the base has been designed to shrink inward, and the actual base diameter is 25 mm.
The electrode stage adopts a suspension structure without electrode column design, but the upper edge of the base is relatively high, and is basically flat with the lower edge of the electrode stage.
From the side, the suspension design of the electrode table is not visible, and the oil storage tank of the base part is also concealed. When the oil quantity is small, the oil storage quantity cannot be seen very intuitively.
Because I have read a few reviews before, I said that the air intake structure is easy to cause the taste to be empty and the taste is light. I did not use the original braided wire.
Instead, it uses a single-shot Clapton wire, 3.0 laps, 6 turns, a resistance of 0.36, MUJI cotton, and a 510 drop nozzle with the smallest inner diameter.
And with the advancer 75W single electric box and Philip old coffee 3 mg oil for testing,
In order to compare with the previously used single-feel drip atomizer.
In addition, the GeekVape Zeus Dual RTA’ s oil guide is mainly for double-engine design. I specially increased the amount of cotton and rolled the cotton using the cake roll.
In order to ensure the oil guiding speed requirement of large smoke while filling the oil guiding port.
The oil storage space (that is, the part of the glass bin) in the middle atomization chamber and the inlet portion is actually very small, and if the smoke oil VG is high when oiling,
Or if the oil is injected faster, it will cause the oil to flow downward slowly and come out from the oil filling port. This must be noted.
At the same time, because of the higher problems on the base, the situation of the bottom oil storage space is hardly seen.
But the advantage is that you can’t see the oil-conducting cotton hanging at the bottom of the oil tank. The designer chooses the former between aesthetics and practicality.
