Day 23/9
Got the other res in there and have made up the hosing and drilled extra holes in the lid.
Will be getting the watering going for them shortly.
14 Likes
Sooo the new watering programming for the left side may of had an extra 0 in the code, so instead of watering every 6 hrs it would of been every 2.5 days…
Oh well they will be back to normal in a couple hrs, and the worse one is the mutant one anyways, and they’re all testers i wasn’t planning on keeping.
13 Likes
Day 25/11
Swapped the two plants on the left just front to back.
Might take out the mutant shortly, possibly the others if i start more seeds.
14 Likes
Decided to toss the mutant earlier tonight, here is a root shot, mind you it was wet in this photo, but it was pretty consistent through out. Not super packed yet, but definitely utilized.
18 Likes
depends on what your running or wanting to run, totally doable with either, or other options.
What are you thinking ?
2 Likes
Looking to run a pump, and 3-6 solenoids.
1 Like
well depending on how long they need to be open, something like two sonoff pros would cover it.
But otherwise but arduino and or pi can achieve it.
just depends on what all you want to do, like are the solenoids triggered by an external input or say just timer based
1 Like
I would think that the pump would work off the pressure from the holding tank, but would have to run the solenoids off a timer. Would also want to try to use it for monitoring (PH, EC, Temp, etc) in the reservoir. The lights I would probably run off a regular timer, but wouldn’t mind running everything off the Arduino/PI.
You mentioned the sonoff. I don’t really know much about it. My understanding is that it is like a home automation type system. Is this correct?
1 Like
correct to the sonoff.
and if your doing monitoring it can be done on both but the Pi is half setup to do things say if you want over wifi for monitoring or control, sure arduinos can do that but different tools different jobs.
Arduinos are great if your kinda want to base control or monitor things, say turning on a pump whenever is needed or say a sensor activates or time based, or just throwing sensor data out to a lcd display, and set it up and leave it running as is. But if wanting to continuously play or make programs where those data points get adjusted on there own and or do that wirelessly or log and make spread sheets from that data then pi is more suited.
the essentially can do the same things just do certain things better or simpler.
2 Likes
Hello @WMoon518
I recently completed a cab upgrade, utilizing quite a bit of sonoff gear.
I can do several things with my gear, from
- Loop timers
- triggered events (based on input from other data)
- Say RH gets to 62% and you want it Higher or Lower, using the “Scene” function in the interface, you can turn on/off a Dehumidifier
- Schedule timer
- App control of each outlet
- Realtime sensor data (limited sensors available at the moment, but more will come as time elapses)
- Sonoff POW - realtime energy usage tracking
- Sonoff TH10/16 Temperature probe, Temp/Humidity sensor.
You can read about what i’ve done starting Here
That being said, Arduino seems easier to utilize than Pi’s and I’ve got several of both. Pi’s have the convenience of being more powerful so if you’re handy with code you can DIY a webserver to read data/log info and put it to realtime graphs/reports.
Hope this in some way is helpful to you.
Jelly
8 Likes
btw update time
day 27/13
Days are numbered for the small DD f1’s now, even if they are starting to bud out, and running a little light.
13 Likes
That little Divyder is not growing at all. I want to see it bud that small… 
3 Likes
I’ve been nursing it along, had a hard time spliting its shell so it needed help, then the tap root decided to try and loop around on itself as it couldn’t figure out which way was down, all while it was just growing quite slow in comparison.
So i may toss it depending just cause of the seeds above will need some space, but there is still time before i need to boot plants.
5 Likes
Day 29/15
The left side has been needing a res change and feed increase for awhile but whatever. Also not sure if ill be running them to finish which would be another 4-5ish weeks.
12 Likes
FYI, I have my eye on the Divyder on the lower right 
7 Likes
Yeah they are all about to take off.
and back right gonna take a guess and say its gonna be male but really just a guess at this point
5 Likes
Yeah just took a closer look, back left is a lady, front right looks like a lady but isn’t quite showing yet, and back right is definitely a boy, the laggard is undetermined so far
3 Likes
Day 31/17
For how far along the DD f1’s are its making me question the date above, as they took awhile to get going and me throwing them under some good light, so maybe another 4-5sh days could be tacked on, didn’t keep track cause they were just testers… guess i learnt from that… so should make notes even if testers or what seems inconsequential as you never know what may happen.
ALso will possibly up the feed on the left side tonight, been a bit to much LITFA lol.
I’ll get a better shot this weekend.
TDC seedling the other three will be joining it tomorrow, as they are popped just have to open up and go green.
The male that showed up of @ReikoX Divyders, gonna let it run out some more forsure, stature is small but also small pots so will have to see if they start taking off in the next week or so, they are pushing side branch growth at the moment so we should see changes this week.
13 Likes
Collecting pollen off that little male no doubt?
3 Likes