Paps runs BOG , Lefthanded seeds, Orange Goji ,Oregon Huckleberry, and useful seeds Octopot style

Indoor Growing
61

Tent is 40 inches x 40 inches it’s not big but it works lol

4 Likes
62

Never gave a thought :thought_balloon: to dimming thanks one mor thing to do lol

4 Likes
63

This is double what I run for clones. There is a dimmer on the driver which you can use (Screw driver)…i’m too lazy to attach a dimmer switch to it (one day I will).

https://www.digikey.ca/ordering/shoppingcart

The only thing with something like this is that the strips are about 11" in length…so it may create hotspots if getting to close to the main light. Feel free to get a par meter and send it my way when you are done setting the lights up :slight_smile:

Though I do like what you picked out…way less work lol

1 Like
64

Good looking bars. Should be easy to configure and connect.

I would want the ab with the dimming.
HLG-240H-54AB

Are you mounting the driver on the frame, or outside the tent?

5 Likes
65

Not sure I was thinking on the frame some how

4 Likes
66

Framing easy eyeball job alittle this and that couple 45° and you will have it!

Screenshot_20201117-202259
Screenshot_20201117-2022591440×3040 170 KB
Screenshot_20201117-202241
Screenshot_20201117-2022411440×3040 158 KB
Screenshot_20201117-202213
Screenshot_20201117-2022131440×3040 177 KB
Screenshot_20201117-202200
Screenshot_20201117-2022001440×3040 77.5 KB

7 Likes
67

1
11059×696 144 KB
2
21062×741 364 KB
3
31097×701 249 KB
4
41077×725 154 KB
external-content.duckduckgo.com

11 Likes
68

Thanks my friend looks good

4 Likes
69

welcome i mean as far as mounting it complete as a all in one unit the little rivets on the top of this light if you drill them out i know sounds sketchy but you can rivet this whole thing together as well just dawned on me i got the chop saw if you need to borrow too…

Harbor freight for the rivet gun

5
51200×741 203 KB

4 Likes
70

Ok I think I’ll pull the plug an get these to start @cdnBuddy @GramTorino @HolyAngel @ct2003viper thanks for your advice

image
image828×1792 57.4 KB

For the frame I’ll pick up some aluminum angle form Home Depot
@ct2003viper thanks for the drawing I got a chop saw I’ll drill some holes and bolt them together

I will most likely mount the driver to the side somewhere I need the over head space

7 Likes
71

What’s the total wattage available after this upgrade?

1 Like
72

@cdnBuddy As far as what I have in the room ?
I recently added a 20 amp circuit with 4 out lets
And there is a separate circuit available for some supplemental things hopefully lol

6 Likes
73

Ok you got me thinking if I have 2 amps and voltage is 240 then it should be 4800 watts

Main tent light 500 watts but usable watts is less I believe
I believe ruff math I should be ok :ok_hand: fingers crossed :crossed_fingers:

7 Likes
74

480 watts :slight_smile:

7 Likes
75

Thanks :pray: my friend I am not an electrician at all

Ok so I think I may be running a little bit much :pray:

3 Likes
76

nor am I :slight_smile:

I know you can run 3600 watts on a 20 amp 220/240 circuit

and be safe as it is about 75 % max load

all the best

Dequilo

8 Likes
77

So far so good all 3 tents were going at once full on and seem to have worked well next time I will have each tent at different times with minimum over lap

4 Likes
78

I was referring to total watts for the tent. You’re around 31watts a sq ft they will be in love with the addition.

I would do the same. Helps me sleep at night lol

6 Likes
79

me too :slight_smile:

my luck I would start a fire and some fireman would die

and this state would give me a life sentence :frowning:

so it is good to stay safe

7 Likes
80

I thought :thought_balloon: it beat the T5’s I was originally thinking about

And the way it will sit there will be no dark spots :+1:

6 Likes