DIY DWC Screen for netpot lids

Parts list:

(4) 16" pieces for the outriggers
( 8 ) 2-3/16" pieces for the small square
( 8 ) 10-1/2" pieces for the grid. I did mine slightly under 24" total square so they can fit in my 4x4 tent. (
(2) 1/4"x2" nylon screws (.14 per shipped = $0.28 )
(4) 1/4" neoprene washers. Think they are 1/2" OD ($0.86)
(2) 1/4" nylon nuts (.12 per shipped separate from screws, more savings if order them together = $0.24)
(12) 90 deg elbows ($2.04 )
(12) tees ($2.04)

13’-10" total pipe ($4.92)

$10.38 per screen

OPTIONAL
(4) 15" pieces for the cola tie-off verticals
(2) 23" pieces for the cola tie-off horizontals

22’-8" pipe ($8.12) (or $3.20 extra)

$13.58 per screen setup.




13 Likes

Some modifications I’ve made over the years is ditching the neoprene washers and nuts. My holes are just the right size where I have to hammer the bolts in.

The lengths are just the size I wanted. The idea is the same. Feel free to adjust to the heights you use.

2 Likes

Great build my man👍 definitely looks like you know what your doing😁

1 Like

Awesome. Thanks for sharing the description and instructions.

I need to build some screens at some point and yours is a great example set-up that I could use as a launching point.

1 Like

Congratulations! You’ve made Jelly’s DIY LINK-O-RAMA!

4 Likes

Haha, found it!!!

1 Like

Nefrellmancer. Thread resurrector.