Has anyone tried the Flower Mill grinder?

.

I saw an ad today for a nifty little grinder called the Flower Mill. The basic difference between it and a grinder is that the mill breaks up the weed instead of cutting it like a traditional grinder.

It’s $100 usd and I’d buy one if the forum consensus is that it’s a decent grinder that could take the place of a cutting grinder. My bud out of my Cool Cure is 60 %RH, it’s kind of gummy and it binds up my other grinders (including my electric Mamba unfortunately).

Advice appreciated, if you don’t have one chip in anyway if you think it’ll work or not.

.

Flower Mill Herb Grinder Review and Test Drive with Video & Coupon (volcanotips.com)

.

.

We’ve all tried different grinders on our herb, and they largely provide the same result. Some offer a finer or coarser setting, or a catch chamber. But what about the difference between how they grind your material? Our review of the Flower Mill grinder breaks it all down for you.

Flower Mill USA is a brand that makes an herb mill . It mills the herb rather than grinding or shredding it. In theory, this results in a fluffier consistency, and it’s gaining quite the following.

Difference between using a mill and a grinder for herb
According to the Flower Mill website, their product “progressively crumbles your herb where it naturally wants to break apart, [which] results in consistent and fluffy herb.”

Depending where you fall on the perfectionist scale, this difference may sound crucial or may sound like a gimmick. We put the mill to the test to see if it really does make a noticeable difference.

The way it works is by rolling your flower across the milling screen — basically roughing it up a bit so that it breaks apart at its weakest points where it’s most likely to break naturally. Do this enough times and it becomes finer and finer until you’re left with a beautifully milled product ready to roll or vape.

The other difference between the Flower Mill and other grinders is that with the Flower Mill you can put in the whole herb including the stem, whereas with some others you need to de-stem it first or even pregrind it a bit so you’re starting with a smaller amount of material in the grinder. The benefit of putting in the whole thing is that you can get it all done at once, and store any left over in the grinder ready to go for next time. However, if you value having your herb freshly ground right before use, then this ability won’t matter to you.

Appearance and style options
The Flower Mill comes in a 3-piece and 4-piece version (the 4-piece includes a keif catch), and in two materials: stainless steel and aluminum. The stainless steel is a shiny silver color while the aluminum is a black anodized material. The outer case is black aluminum regardless of which interior metal you choose.

The benefit of the aluminum is that it’s a lighter weight material. This makes the fully aluminum versions the slightly more travel-friendly choice, but the stainless steel isn’t far off and both weigh more than I was expecting based on their size. The Flower Mill is small and can easily be taken with you regardless. The benefit of the stainless steel is that there is some evidence which suggests that devices made with aluminum can have an impact on our health, so for those concerned, the food-grade stainless steel is a great option.

The lid of the outer case has a magnetic closure and features the signature flower logo in silver. It’s a stylish case with a simple design that looks attractive on your desk or shelf. I appreciate that they only used their logo instead of some big, obnoxious text. It also leaves those unfamiliar with the Flower Mill unaware of what this device is.

It comes with a standard plate which will give you a nice medium coarse mill texture. If you want something finer, you can buy the expansion pack which offers 3 plates of varying coarseness which are all 3 finer than the standard one included with the Flower Mill.

Performance and ease of use
The mill is simple to use. First, pop off the lid and load your material. Remember, you can put the whole flower in there, including the stem, so this part literally couldn’t be easier. Next, put the lid back on and very gently push it down while twisting it. This rubs the flower against the milling screen to break the flower apart.

The Flower Mill works surprisingly quickly — only a few quarter turns will do it for a small amount of flower — and it provides an even result. A consistent grind is key to getting a smooth draw so the performance of this grinder is spot on to give you a good experience every time.

The toothless design means an easier cleanup, and this thing is super easy to take apart, too. I like that I can fit more material in there if I want, and that the case can double as an attractive storage case. And it just works so simply and effortlessly, it sort of makes traditional grinders seem obsolete.

But is it worth it?
There’s no doubt that the Flower Mill provides an even, consistent, and beautifully fluffy herb that you will love. The device itself is attractive, simple, and so quick and easy to use. I really have no negatives to share. Until we get to the price.

The 4-piece Flower Mill comes in at a whopping $100. That is a lot of cash to shell out for such a small, simple device. For how simple it is, you’d really think it’s overpriced. But, the result it produces is just so fantastic, I see why it’s gaining traction in the cannabis community as people’s new go-to grinder.

So it really all comes down to how particular you are about the quality of the material you use. If whether your flower is milled or traditionally ground makes a noticeable difference to you, then you will be pleased with your purchase. If you’re a more casual user who can get by with weed ground any which way, then by all means skip this one.

As for my review, I’m impressed by the Flower Mill and will likely reach for it over my other grinders for the foreseeable future. If you have any questions about our Flower Mill grinder review – contact us in the comments below.

You can now use the coupon code VTIPS5OFF for 5% off your order!

.

5 Likes

One of the best pieces of advice my ol’ man gave me was “put your money into the tools you use every day”.

tl:dr = yes. :+1:

I haven’t seen a mill/grinder operate like that but hey, if it works… it works!

Cheers
G

5 Likes

Never tried one. Purely speculation on my part but at first glance I would think it’ll need a good bit more cleaning to maintain its effectiveness compared to one of the old toothy cutter ones.

1 Like

Well dang, I’ve had a tab open in my browser for more than a couple of months to that site. Looks like an interesting mill/grinder.

I’m mostly interested because I’ve got a little bit of arthritis in one of my hands, and while using my current favorite grinder (Cali Crusher, nearly $100) is easier on my hand than a pin or diamond tooth grinder, it is becoming more and more difficult for me to turn. I should mention that I keep the Crusher fairly clean, so there’s no massive amount of gummy buildup. I probably wouldn’t be able to turn it at all if it was really gummed up.

When I first opened the tab and looked at the product line, the milling plate kit was out of stock. I was impressed at how quickly that was rectified, given so many sourcing problems across the board these days. Full disclosure, I don’t know how long the kit was out of stock.

For a reason I don’t fully understand, that fact that it’s back in stock gives me more faith in the company. WTF.

6 Likes

Wallymart coffee grinder- save your wrists for more important stuff. Takes a bit of practice to learn how long to pulse it but beats the pain.
Only really downside is it flings & destroys trichomes. I’ll do a scissor cut joint like once a year to remind me the difference is minor.

:evergreen_tree:

7 Likes

After looking at my buds through my loupe, after grinding, I’ve not used it or picked it up for over 15 years or more.

3 Likes

:cucumber::sweat_drops: you wrongen :rofl:

3 Likes

You’re saying you dont use a grinder? crumbled or just smoking whole nugs in a pipe?

This is another interesting one that people over on FCombustion seem to like who have arthritis, the company came back after going out a few years ago with an improved version people like even more it seems:

4 Likes

I bought one in san diego for $30 recently after buying a bunch of flower while visiting. I love it the mill makes nice fluffy bud flakes, the keef catcher catches alot of keef, the top of the mill is magnetic so holds my dabber when not using the mill, and the every part is removable for cleaning.

My friends and I have tried it side by side with electric grinders, a santa cruiz shredder, and plastic grinders. So far the mill has been the favorite.

The electric gringmder seems to turn the bud into dust.

The shredder grinds ok but super hard to clean.

The plastic one sucks

5 Likes

Welcome to OG, @Jeeper!

I wonder if this is the mill you are referring to? It’s called the Flower Mill Grinder.

1 Like

Welcome to OG @Jeeper

Did you buy one?

1 Like

blush In answer to @Bert’s now disappeared question, no, or at least not yet. I cleaned up my Cali Crusher and since I’m only smoking dispo weed these days, it hasn’t clogged as seriously as with my home grown.

It appears that I will, happily, have a grow this year, so I may spring for one yet. I haven’t, however, been updating my thread. I don’t know why. :frowning:

2 Likes

I put the question back. Accidentally deleted.

We look forward to seeing your grow! BTW - there’s a thread discussing why dispensary weed doesn’t taste that great. Are you satisfied with the taste of the dispensary weed? Is it overly homogeneous in flavor? I’ve only smoked a little bit of dispensary weed and found it tolerable, but overpriced.

2 Likes

.

I bought a flower mill and it works great, a little adjusting the bud being milled part way through.

I found a better grinder from the Diamond Cut company, the grinder never binds and it’s fairly easy to use. My main grinder now, nothing else compares.

.

1 Like

I’m a bad person to ask. Since my stroke, my taste buds have gone to hell. It’s pretty much all I’ve been smoking for the last year plus, so it must taste at least okay.

Shit, with a more than 30% tax, you bet it’s overpriced. Anything common with that much tax is overtaxed.

3 Likes