in matters of praying i try to avoid it. because it should be a sign of light stress , ithink
but thank you for your kind words!
3 Likes
the cheese note is the most dominat, after you crush bud you got a fruity lemon note mixed in. let say the mix is around 70% cheese and 30 % lemon.
iḿ really sorry that iḿ not good at that 
5 Likes
Nice, it sounds like really good. You did a good job man! 
Pz 
2 Likes
thank you!!!
1 Like
Hello Overgrow,
i wish you all a happy easter!
FLC is on flowering day 21 and the Wedding Cake is on day 17.
FLC is doing pretty good no Cal. defs atm, so i`am happy with that, and i might be able to keep them green a little bit longer. After the drain catched up to EC 1.1, the ph became unstable and i decided to go a bit lower on the EC.
On 1.0 EC, pH is stable again at 5.8
Temps = 20-22°C
RH = 56-65 %
EC = 1.0
pH = 5.8
Wedding Cake is looking fine, but she can`t take high ec values. i never had this kind of low eater.
but as long as she likes it, i should not care too much.
Temps = 22-24°C
RH = 58-66 %
EC = 0.70
ph = 5.8
enjoy and stay safe
14 Likes
Bro…ur garden is getting all exciting!
I’m sure the smell when u enter the room must be amazing…
Looking great brother. The girls sure look happy with u around…
3 Likes
Thank you iceman! They don‘t smell atm. But they should in the next 2 weeks! I‘m also looking fortward to it 
2 Likes
Look at the gorgeous even canopy 
2 Likes
Hello Overgrow,
i hope everyone had a good weekend!
And sorry for the delayed update!
FLC reached flowering day 29 and the Wedding Cake is on day 25.
FLC still doing fine no Ca problems. From time to time i`m removing a few leaves but thats it. Ec was lowerd a little bit more. in this state i don’t think, that they need that much N anymore. Otherwise not much to do atm 
Temps = 21-23°C
RH = 54-62 %
EC = 0.85
pH = 5.8
Wedding Cake amazed me in matters of growth. they look pretty large and hopefuly we get a few nice buds at the end of this round.
Temps = 22-24°C
RH = 56-64 %
EC = 0.70
ph = 5.8
13 Likes
Looking great as always brother…
Regarding the ec, would you continue with this until harvest?
thank you bro ! 
jepp i do.there is no reason to put more in. if i go any higher the pH will drift downwards in 24 hours to 5.5 to 5.4. iĺl try to stay at 5.5 -5.8.
the formulation looks like this
N = 94 ppm
P = 74 ppm,
K = 112
Ca = 101
MG = 33 ppm
any opinions on thqat are welcome
4 Likes
Interesting to note.
With my grow, I just completed week 9 since i flipped to 12/12 and I’m still feeding 1.3ec in coco dtw.
Also I believe that since I defoliate, the flowering period or harvest date is delayed by a few weeks.
But I’m more concerned about the ec. I was wondering if it’s good to reduce to the same as what ur feeding. I’m seeing new pistils still form and kinda worries if it’s the ec that could possibly be delaying and adding more new growth.
Also I’d like to know how many times a day are you watering and would you reduce (dryback) much later into flower?
3 Likes
ec can be pretty different on different fertilzers. nitrat ect ect. i have quite alot salts lying around to play with . the N parts come mostly from nitrat. but i also have some that have high ammonium. when using the high ammonium stuff the ec i way higher then with the high nitrat salts.
for coco iḿ not sure if the same rules apply like on rockwool? so there are people here who can give you better tips on that . because i have a liitle to no exp. with coco.
But aslong as the ph is stable no need to worry about the ec i think.
going down with the ec on the end of the grow is pretty normal because they are ending ther lifecycle.
watering is automated. 6 times a day for around 1 minute in the big tent. that gives you around 600 ml per plant a day. drain to waste or drain to garden
the small tent is running 6 times around 5 minutes but it is a closed sytem
6 Likes
totaly forgot the defoliation. 
i´dont think that defoliation prolongs the flowering time. and so won´t the ec but that just my opinion.
and i could be worng on that. still learing ;D
new pistilsl forming just means that the new pistils won´t rippen completly but the others do.
you can observe this on some skunks pretty good.
3 Likes
First of all, your tent looks absolutely amazing
I’m jealous 
And second, I find that during flower you really don’t need much nitrogen. The plant really needs P&K to make nice buds.
I find a few different formulas online, but here is one that I kinda go off of.
NPK
1:3:2 for early to mid-bloom, followed by 0:3:3 for the late flowering stage.
A little N early in bloom is okay and some recommended it, but later on you shouldn’t need to add any N and the plant will take any N from itself and cause a nice fade as well.
N won’t hurt tho, but I don’t think it’s neccssary.
And the higher P & K towards the end should increase the resin production. Some even increase them by a lot to push the plant to it’s limits.
Ive even used fertilizers as high as
0-0-53
Combined with
12-61-0
For the last couple of feedings with amazing results.
4 Likes
Hi man, hope you`re doing fine!?
thanks alot! i`m also happy with the results so far.
iḿ looking forward to see what you do with the FLC! around 2-3 weeks by then i will be able to take cuttings for you. when they are ready i`m going to drop you a pm. 
3 Likes
@m0sirys , thanks for inviting me to take a look. Your grow looks fantastic, good job! I’ll follow along as you finish up.
1 Like
thanks alot !!
your thread is bookmarked too!! So if you ever have questions in matter of rockwool just ask iḿ more than happy to help !!
2 Likes
Oh sweet !
Thank you so much
She will definitely be put to use this year !
I had so many plans for her, and when non of those seeds popped I was really upset. You will definitely be saving my projects, and I’ll be in debt to you for that. Thank you so much
†
1 Like
Havin high numbers like 10/60/60
Is the same as 1/6/6 , the high number don’t change anything
You just mix less into the Rez
A bottle of 10/60/60 is the same as a bottle of 1/6/6
The 10/60/60 is just more concentrated ( 10x ) so better value for money , but when a certain ec is reached in Rez , both mixes are the same : )
If you feed 1/3/3 - 1/6/6 right till the end the plant will try to keep makin bud and won’t finish ( pushin p and k togeather and in equal ish amounts makes buds )
But if you drop the level of p at end the plant can’t make new buds and will finish better ie 1/2/6
4 Likes