That would be the way to share seed runs. I wonder how many fully loaded kit kats could fit in an envelope and be under an ounce.
Thatâs awesome! Things like this make me really want to pull the trigger on a 3D printer. Thereâs just so much you can do with them both creatively and practically.
2 Likes
I made the screw top for personal stash as I donât really mail much stuff yet and a sticker isnt permanent. My bad I didnât specify why I made it. Def wasnât trying to reinvent the wheel and didnât intend for it to be a replacement for what yall are working on here.
1 Like
I think they were just toying with ideas for built in caps, yours came up cause itâs a solid example of a screw top
2 Likes
Kinda⌠Just doing some numbers here on 50 pcs, 10 hole pucks. Print time for the âcoinâ is 10.75hrs, print time for the caps is 2.75hrs
Well, the holder with cap will weigh about 5grams for the 30/36 idea. empty (I gotta fill and weigh tomorrow).
This is the friction fit test piece:
Ok. gonna work on some numbers now, and make a 3D print thread in a few⌠But first⌠a few hits of some bubble hash 
8 Likes
Hey, thats the purpose of a 3D printer man, its all good!
Iâve been doing my own designs a few years and learned some tricks along the way. I have a few screw-together stash boxes. Youâd be surprised, if you print one, then coat with flex seal, and use an o-ring to help seal, they can withstand 3 atmospheres of pressure (down to 30m underwater / 100ft!) Not like weâre bringing our stash to 100ft down 
But I tested some in Cozumel last yearâŚ
6 Likes
Lmao, I kinda want to mod that tic tac gun to shoot seeds now
4 Likes
LOLâŚ
Other Guy âwhatcha doing?â
âMe? oh nothing, just planting a few weedsâ pew! pew! pew! pew!
Other Guy âIâm still lostâ
mwuhahahahaha
7 Likes
Guess would be less printing for caps on a FDM machine, resin if same height then same time more or less.
Nice proto
3 Likes
You could put the screw in the middle of the puck like a umbrella. Use the sticker for the edges.
So I have come here sing the praises of @SensiBowl. I pack a ton of seeds and he kindly offered to make me up some of these pucks and a seed sorter like the one in the OP. Today I not only received the sorter with pucks and stickers but he also sent a really cool glass pipe and glass screens for it. Really cannot thank him enough. The time this is going to save me is no small thing. I tested it out and it works great. Here are some pics to show this amazing thing. I also showed the weight of the coin flip with washer vs the seed pod. The pod knocks off almost a full gram.
I got to say @SensiBowl has done me such a great service with this and I am very grateful to him for it. Now I can pack 9 at a time with minimal effort and also pack more into an envelope with a single stamp due to the weight difference. Thank you so much @SensiBowl , you are amazing.
25 Likes
Glad it worked out, Nice to see and confirm it will actually save ya some time too! 
8 Likes
Honestly I think it will save a ton of time. I filled those 9 pucks in a few seconds. The time saved in both taping up flips and also counting seeds is going to be huge. You are a rock star brother, you really are.
11 Likes
Those are so cool, I was watching when he showed them the first time and Johnny uses them too.
Makes me want to buy a 3d printer.
4 Likes
Iâm in 
jail again but more than appreciate the kind words, just trying to keep it OG! 
7 Likes
Brother you hit it out of the park and are truly a shining example of a great OG member.
5 Likes
Mines coming from @bobgrows, So Stoked!
6 Likes
Just got 3 from an order from @JohnnyPotseed and they work and are pretty sweet and no noise just like you said @SensiBowl nice 
5 Likes
All distributors should have those! Thatâs a wonderful tool. I want one now. I usually only load a handful of of flips at a time but thatâs definitely a useful item
5 Likes
How long does it take to print those things?
I like the glass screens too.
4 Likes