Where did you get that!!!??? I wants!!!
Canagar mold that is
1 Like
@ReikoX I’m pretty excited to give it a good try!
@HaRdRoC a company called cannagar tools they have a website, there are a few companies making them but this guy is US based, prints with 3d plastic(he even has hemp derived plastic) as well as the more complete line.
4 Likes
Couple Bruce Banner #3 autos transferred into 2gal pots in veg tent 8 days old.
2 more B.B. #3 autos into flower tent 2weeks old…I have photos in there so it’s 12/12
7 Likes
Havent had a chance to try the cannagar mold yet, lots gooing on and waiting on flower to dry… got a few beans and plants lined up to go into flower tent when ready. Sproutingns in the veg tent
1 totem (fruti pebbles x paki landrace) 3 skunki monkey (gorrilla bomb x bubble skunk) and 2 good karma kush. I’ve got a couple 26w blurple squares from my old microwgrow I’m going to use in the dry/pollination tent… figure it should be good to keep a male and female in for a few days…I believe I’m going to polinate one of them preferably the skunki monkey.
2 Bruce Banner #3 autos (12 days) in final 2 gal fabric vegging for a bit
0ne of the BB#3 in the flower tent is growing out a little better than the other (both 24 days)
And the lemongrass 2 just about done, the other a week or 2
9 Likes
Got to work a little early this AM to get started on a couple plates to press and dry leafs for cannagars just 1/4 inch steel plate 10x14" with some 1/4 bolts and fender washers for lifting handles. I’ll give em a clean up on lunch
3 Likes
Press plates are sandblasted and painted…I cut them to fit these “fish buckets” I get from resteraunts (they receive fish in them and come in 2.5" deep and 5" deep) I use these for all my growing/cannabis supplies they are heavy duty, stackable, have lids, and best …I can get them for free. Received notification of shipment of my Solsheet kit, it’s going alongside my hlg 260
5 Likes
Chopped one of the lemongrass this am, last night while breaking up some flower I got 5 seeds from one of my polinated buds so I guess my pollination attempt was technically successful. The indica leaning pheno of the lemongrass (Humbolt Seeds lemon kush x humbolt gelato)
11 Likes
I’ve been telling myself I need to get rid of the homemade bars and buy another quantum board, well I did and I’m waiting for a solsheet kit to arrive…but this am when moving 2 more BB#3 autos into the flower tent I realized I’m going miss the versatility of them.
6 Likes
The B.B.'s I’ve never run autos before these were a win in another group. First 2 @ day 21 other 2 @ day 16 but first in 12/12 tent.
5 Likes
5 Likes
Cackleberry and Marauder seeds arrived today, don’t know which to pop first …anyone grown these, any particular phenos to look out for?
Email says Solsheet kit arrived today, can’t wait to get home and get I put together.
I like projects, this is another I’ve started collecting parts for a keif tumbler.
4 Likes
Got the solsheet assembled this afternoon, took about 90 mins. You can really see the difference in the spectrums
@Baudelaire nice job on the kit , went together no issues.
10 Likes
Killing it there, so much going on! Are those fans for your drying/pollination box 120v? If so, where did you find them?
Also, are those carbon scrubbers that are hooked into them or prefilters? Nice build, such a good idea with the louvres.
1 Like
@beacher the fans are pc fans they plug into USB plugs that plug into the wall I use the 120mm AC infinity one that fits the dryer vents. Filters are just for filtering intake , I use Panasonic whisper fans for scrubbing the small veg tent has a home made charcoal tray mounted to it and the large flower tent has the bigger fan and the usual charcoal tube type filter. (Haven’t found a filter yet that works as good as the homemade tray yet) so I also have a 1 gal bucket of ona pro with a fan mounted that is hooked up to a short cycle timer that neutralizes any odor that passes through.
I tried making a wrap for cannagar using dried pressed leafs that failed…the cigar glue just added too much moisture to the brittle leafs … I ordered some bovida @ 75% and am going to make a leaf wrap and then press and dry to 75% (cigar wrappers use leafs around 75) and see how that goes. Transplanted my totem, good karma kush, and skunki monkey to 1/2 gallons in the veg tent (tent is only 2x2 ) and there is just enough room left to start the next beans in line this weekend, I’ve got the lemongrass f4s, Marauder, and cackleberry to choose from. Got my keif tumbler catch tray done in stainless this AM before work probabally won’t be able to get to the lid until next week.
4 Likes
I used to use that ona gel, it does work great, pretty overpowering when 1st opened. Now I see they have all different scents of them now and not just the normal.
Great looking setup you have!!
How do you like the ac infinity? Is it the 4 or 6 inch? I have the 6" (360 cfm) and it really is very quiet.
2 Likes
I like ac infinity products, I’ve used their small pc fans for projects and I use the 4 inch for additional air intake. If I’m ever able to set up a bigger grow I would go with either the AC infinity inline (6 or 8inch) of the panansonic whisper bathroom fans…I like the “Pro” line of Ona, it isnt overpowering it’s pretty mild unless like you said when you first open it. This is the space I have to work with for veg 30x18x36 stacked on top is my dry/polinate tent
And how they sit under lights I move them back and forth between blurple and the homemade 6000k
Above the blurple inside the tent is my panasonic whisperline carbon scrubber
<imgsrc="/uploads/default/original/3X/d/e/de0b74a04ac2e3dc358dcd4279681afbae276c0d.jpg" width=“666” height=“499”>
3 Banner sisters up front and another banner back left and a lemongrass back right. So far the gals are diggin the solsheet the pic is deceptive it is about 8 inches from the tops
7 Likes
That’s a really great setup, thanks for the info. Which seeds do you think you’ll do next? That marauder looks like something special, although the others do too lol
1 Like
@beacher Im not sure what I’ll have with the 6 in veg as far as M/F (hopefully I can do a whole plant pollination on the skunki monki) so I think I will fill in whatever empty space I have with some skittlez autos I won and then pop prob Marauder behind it.
First pics are of BB#3 @ day 16 and then the BB#3 @ day 28
6 Likes
Baby steps… a little progress this am on the keif tumbler… I’ve got the drum mostly figured out but haven’t started on the parts yet…the motor is still up in the air…I’ve seen some who use a rotisserie motor, but I need to do a bit more research as well as for a strain that will make the effort worthwhile to tumble…any recommendations on a strain that will produce some serious keif?
5 Likes
