How can I focus It on the plant?
You could turn it sideways or disassemble the light and work with the LED strip that seems to be inside.
I am not able to disassemble but I can put It sideways or put some foil ti direct the light down…?
I built this,Is It Better?
Little update:The cardboard Is smelling likes warm paper but the temperature doesn’t go up more than 26 degree,I should get a fan or I am afraid the box could catch fire…?
This lamp Is too hot
The foil seems to do the trick regarding light, but if you say the lamp is too hot without it, I would strongly advise against running it unattended with that foil on.
which brand light do you have chose,?
I put the timer to run for 30 Mins and then stop,repeatedly,maybe when i got the led lamp from Germany It Will not be and issue as this led Will stay on a Little to help the other One…or maybe I can solve It with the fan
It s in the picture,It s advised as led
I would take the foil off and turn the lamp sideways without a reflector rather than have it time on and off like that. If it sprouts and the light is cycling you could have all sorts of troubles with the seedling.
I constantly keep an Eye but yes,I should put It sideways but don’t have idea how to attach It and where
Having the light cycle like that will cause problems.hang the light sideways and see how it does. Definitely font want the foil right on the bulb though like was pointed out. I noticed in the picture you had a splitter for 2 bulbs, do you have another one of those led strip bulbs? The reason I ask is if you have 2 and use the splitter it should angle the bulbs enough to get rid of the dark spot underneath and would open up your light area plus then you wouldn’t have to try to figure out how to hang the light sideways
I m going for the two light set and remove the foil
I think it would be a good start
So,I bought cheap 15 watt led lamp and cheap USB fan.Total it’s 15+18 watt and don’t know if the Electric Bill Will kill me…I will update you all soon
Hows it doing heat wise? Is it getting hot? Also what about the foam? Otherwise from what I see seems better though maybe lower height on it for now? Just thoughts, there’s alot of others here far more qualified to answer than me but I try to help when I can.
That looks 1000x better
I Just glued the foam,cannot get any lower and It sucks,but I can tell you the other desk led lamp full spectrum 24 watt Is coming from Germany,and I can put that One very close and let the bulbs off.
The igrometer says 28 degree and 50% humidity,I think Is ok because I touch the lights and they are no hot,Just a Little warm,It s comfortable inside.It looks Better with the fan
Thanks,gonna check for the heat though
Good work. Starting to look like a mini grow room now.