I figure that’s all that going to fit in my ghettorade container so I sure hope so. . .i can raise the volts up to 6v durning flower and run it on overdrive lol i will be happy just to get 1 plant with decent buds!
And at 4.20v I’ll be pulling around 31.5 watts with all 50 connected
1 Like
I was thinking about picking this up
Anyone every used this one?
2 Likes
Most cell phones have that built in. You can likely just download a free light meter.app for your phone.
2 Likes
So I downloaded the light meter app. . .and it’s saying I’m pushing 10,240 lux at 3 inches away at 3.7 volt and 10,240 lux at 6 inches away at 4.5 volts
3 Likes
She it’s good enough for comparison measurements like that. If you want to get fancy, you can get a PAR meter, but they are expensive. I still haven’t gotten one yet… yet
1 Like
Lol ya I was actually surprised that it worked so well. . .it told me my 14w energysaver florescent light was only push 320 lux. . . So I don’t know how accurate it is but for what I need it for it worked great. I’m assuming even if I added the 45 other led strips my lux don’t go up, and if I can pick up one of those par meters , I’ll let you borrow it reikox:grin:
2 Likes
@Meesh heres my update 
My baby top lol
Here is a lower branch
@ReikoX your “pollen chucking” genetics are making me look good
I think your can be promoted to breeder badge in my book
7 Likes
1 of my autos has been budding for 2 weeks. the other 4 barely started.
Love that bud porn!
1 Like
Manual like override @meesh, Not bad for grow bro science eh @McMuffin, lol I won’t lie they look a lot bigger in the pic, probably the smallest popcorn buds I’ve ever grown but for strictly in the window only 3 hours of direct sunlight and hydro by eye I’m happy with the data I’ve collected, plus I’ll be getting seeds from both a razzleberry cross and a LR x UV2 “quick draw mcgraw” auto cross
3 Likes
It’s still in it’s super ghetto test faze right now but here is a sneak peek
Lol ya I know ghetto but I warned you hahaha
Here is the best part
Did a little fiddling with my light meter app and got the max output reading to go higher, still don’t think it’s accurate but I’m pushing at least 20,480 lux
This is at the same height as the top of the little one
And that’s only at 4.20 volts I can crank it up to 6 volts overloaded and 5 volts highest rated volts
10 Likes
@gordongecko this is what my data is for 
2 Likes
Now I see why they call you Houdini~:ok_hand:
1 Like
The Good
She’s frosting up real nice already, and has an amazing grape/berry aroma with a very slight skunk musk. . . .
The Bad
With less than 3 hours of direct sunlight, her buds are the smallest baby buds I’ve ever grown, but i expect quality over quantity and tbh I didn’t think my hydro by eye would work very well hehe
The Ugly
This is my ghetto “reservoir” . . .it started rusting a few weeks ago, and I left it as a little experiment to see if it would cause any harm to the plant in any way. . . Nope
6 Likes
She has been in there under the light for over 72 straight hours. . .long enough that she would be showing light dep symptoms, which she is not. . .
She looks just as good as she was in the window with 4+ hours of direct sunlight, so my tester faze is over and it’s on to the full Monty
7 Likes
Built the ghetto frame out of some aluminum framing off a broken window
Couldn’t find any of my drill bits so I had to make it “lock” together, with tabs and grooves
20 led strips soldiered so far 30 more left lol. . . This is what it should look like (it’ll be straighter) when it’s finished
Anyone have a suggestion for a good high temp glue to attach the mini led strips to the aluminium? There is no way to screw/mount them, so it’s got to be glued:v:
Edit-@anon58740919 @Albannach you are my go to diy light guys, any suggestions on a glue?
4 Likes
Close up bud porn @Meesh
5 Likes
Boom all 50 are soldiered and ready to adhere. . .will probably be getting some kind of glue on monday👍
5 Likes
Thermal tape is gonna be your best bet there brother. High tack both sides and operates to around 80c. Looks good btw for ghetto rigging 
That’s the kinda stuff you want to be looking at my good sir
5 Likes
Amazing my bro, thank you that is EXACTLY what I was hoping for! I’m going to order some tomorrow🖒🖒 you are a great help
1 Like
Glad to be of service bro. Shop around a bit though that was an example link you will probably find cheaper elsewhere definitely the way to go. No mess either
1 Like