I always wash my bags in ice cold water immediately after pulling the hash. It has always stayed clean without any solvents needed.
9 Likes
oh yah also I forgot to say, if you are having trouble stretching your bags over a bucket…or, well, this applies to any application involved in fiber stretching. Get the top of the bag wet with water, then it really stretches easy.
2 Likes
I’m almost done my happy batch! This batch, I predict, will be a winner…because it’s made from the specially selected big bud plant. Wait till you see this mm mmm good.
1 Like
got awesome nugs on standby!
Cold and creamy, just a little plant material in there. You 'kin see it under magnify view.
So how did it wind up as a little monster chunk there? I used centripetal acceleration. Just picture someone with their hand around the neck of the bag swinging it around in a circle really fast. Water is forced out of the bag, and the hash gathers in a ball at the bottom, making for easy extraction from the bag. It came out of the bag looking like this. This is the baseline for testing the 30min sitting! The bag should be nice and clean for the test run. I think this is a 25gram chunk, just by eyeballing it. Gonna form it into a patty.
13 Likes
I’ll post a microscopic photo later, once all the water vapors are gone. It really doesn’t help take a good photo. Damned vapors, but tomorrow probably, I’ll have a good image. Drying tech can be one of the following: dry ice, dehydrator, freezer, shelf, hair dryer. The thing is, with this hash you have to be careful about how much heat you really apply. If you are using the dehydrator or toaster oven/real oven, make sure you keep the pieces of hash small!!! Don’t go whining to me if your hash melts into a puddle and never reforms. I warned ye! Keep the toaster oven on warm/real oven lowest setting! Make sure you keep checking on it. Shelf is low tech and it’s just like it sounds, you dry the hash sitting on the shelf until it stops losing weight. Put it in the freezer afterwards, so it’s good forever. freeze dryers are expensive, but you can replicate that with a cooler and your hash sealed in a ziplock bag. Stack the hash in the bag with the dry ice 1:1 ratio DON’T seal the cooler it’ll explode. You can do it with the freezer as well sit the hash in the freezer and wait a week…or more it’s better to make the hash a thin layer. Crap, I just realized you can just read how to freeze dry food on wikihow lol you don’t need me to explain it. Whatever! I’m using the shelf method! I love to freeze dry a little and call it hippy crack as well though! mmmm Good stuff!
2 Likes
Watched the YouTube video of Frenchy cannoli his technique is amazing had he explains the whole process of heating the hash
I use his proven methods and believe me it makes an amazing difference in the quality
Every time I see it I learn something new
5 Likes
hmm, well frenchy… I mean, you’re cleaning your bags with solvents. Maybe we should talk.
frenchy says rehydrate 15-20min. He is using dried buds eh…says the buds are brittle? hmmm, I can’t honestly say my dried buds are brittle. strange. good lord he is an alcoholic… i mean isopropolholic!
oooo he said use snow in your machine…now that got me agitated! He claims there will be “a lot more material in the machine” by that he means more pieces? hmmmm ok wtf “If I want a thin slice of all the dimensions of the ripeness of the resin, I will go with a short time and little power” I WANT TO FACEPUNCH MYSELF! man…I mean… I don’t think i can watch this crap, sorry. I’ll keep going, but I need to go and fucking rip a temple ball.
13 Likes
After getting ripped off my ass, I have decided that watching the whole thing is important. It’ll really give me an insight into where people are coming from who watch these videos. Unfortunately he has many unsubstantiated claims, also I cut him some slack looks like English isn’t his thing.
3 Likes
which video are you responding to? you don’t have to agree with him or all of his techniques but theres no denying he makes amazing hash and has many years putting in the work so idk why you’re ripping on him so harsh
4 Likes
sigh It’s not him. He’s a really great guy! Yes and his hash is great too, that’s not the issue. It’s the unsubstantiated claims of scientific knowledge. The secrets he’s withholding are insane.
1 Like
oh sorry, I was watching the whole kit and kaboodle like 5 hours worth of stuff. ohhh he just use thc woo!
1 Like
ok I watched everything, and I mean…everything. He makes many unsubstantiated claims. That’s all I can say. I watched him roll wine bottles of water over hash to make it melt down into something he can ball up. Sure. I used a hair dryer. I used chill bags and a hair dryer and got the same results. With a variable speed drill and cake mixer. Then I told you all the secrets he wouldn’t. I mean, I don’t claim to be anyone, I’m just two feet and a heartbeat. He’s the authority…that I can prove wrong. Ok so here’s the thing… demands for evidence are kryptonite to unsubstantiated claims. Just remember that saying when he’s making a claim. I’m not shitting on the guys head or something calling him names, but he needs some evidence.
3 Likes
ok ok here’s a classic one: The “ripe” trichomes are a different size. okbro…what’s a “ripe” trichome to you? It makes the concept into whats known as a “non-falsifiable hypothesis”. Like…look into the microscopic photos and tell me which are the “ripe” trichomes and how much their “size” differs. It doesn’t seem like he’s the kind of guy doing biological research, you know what I mean? It gets me agitated because he’s all “sciency” but never considered doing a study.
5 Likes
video one: “The darker shade of brown is because it is sun-grown, and they go into deep amber color in the mountains” 1:38:58
This is a great unsubstantiated claim, he also thinks it’s non-falsifiable. Except that claim is wrong. I mean, I can watch the process as being a technical process but…do I have to have my head filled with bullshit as well?
6 Likes
@JoeCrowe hi bro damn sorry I even mentioned it wow
I do use some of his methods it works for me
I take as much good information I can from everyone
Recently I found a very small piece of hash must be 3 months old when I made it I did do the bottle thing that cannoli did ,the piece was a one hit damn I wish I made enough to cure like that amazing tasty and strong
Hair dryer thing cool it works for you great to hear to each their own Ways it’s doing the same thing great
All I’m saying is that I learned more about making hash then I know before I watched The video so for me it was a good thing
Peace
Paps
5 Likes
lol! I’m not going to completely dissect his videos, don’t worry. But you see how irritating I am to regular people? Godamn, if I’m not creating a falsifiable hypothesis out of what he’s saying… then falsifying it, people hate that. It’s carl sagan’s bullshit detector toolkit. The problem is, he uses unsubstantiated claims to fill the void of ignorance. People do that. Ok that would be fine, except if you review my philosophy… I have stated the truth is what I base my future decisions on, so if I don’t have the truth, I have nothing. Just think about what that says about filling the void of ignorance with bullshit. and @Papalag, don’t feel sorry for bringing it up. It has allowed me to expand on how science works.
ok you can see a few plant fibers that are smaller than the head of a trichome. The human eye can’t resolve things like that size. The last image is a plant fiber at 400X, so small it’s definitely invisible.
10 Likes
here’s the hash patty I just cranked out, compared to the standard one. Whats left of the SBR hash is there as well. So you can see, even though I used LESS material to make the big bud hash than the SBR, I got a much higher yield. You can even see they are basically the same under the microscope except for the crazy spotted trichomes in the SBR. YET the fact remains the SBR hash yields less and it’s terrible hash, using the same process, and coming out looking the same.
If you stick with me, I will show you more crazy scenes from inside the goldmine. I can’t wait to show you how the kingtut comes out a deep red. nutz! It’s full melt hash mmmmm. Red full melt.
10 Likes
Can you define what makes or is in your terms “Primal Hash” and or your process for it in base terms, and obviously a plant that has a higher percentage of capitate stalked trichomes would make a better hash donor than one that has bulbous, glandular, and or capitate sessile trichomes, but if not making hash and that resin is extracted in other ways or consumed in bud form the percent concentration could be the same obviously depending on the plant and how it was grown.
6 Likes
primal hash: melts super easy, makes a big cloud of vapors in the bottle. Primal just means first and foremost hehheh just as a tribute to my friend. No real meaning. I just slap that label on the hash that tests as excellent.
The yield test I have devised is a real world result with…of course, results you can hold in your hand. The yield test is what I have used all these years to make sure the hash I crank out is always full melt. I’m not claiming to be some kind of superman or genius, I am just some guy with a microscope and 2 eyes. Probably a brain too, so I’m not making an argument from authority or credential-ism.
Yield test is simple, make hash, then solvent extract. more hash = good, hash test = good, plant = good.
The growing method is a control. The hash making method is a control. Harvesting time is a control. Plant type is a control. Lighting is a control. I mean, hopefully I science-d the shit out of it. As long as I have all my controls, and I’m testing a specific variable, I should be ok. If you think I botched the study feel free to chip in. I’m not going to rage on you for pointing something out lol or making a suggestion.
My laboratory is just a couple of rooms where I can control the environment to my liking, and a work area where I make and analyze the hash. I got my distillery I made and a filtering machine I constructed as well for the oil. You can see my lab isn’t something special just imagine I’m like some kind of hobo or something, beats me.
5 Likes
I can slot an experiment like that in there, @Mr.Sparkle, I’d be interested in seeing the result. I was actually thinking of a rosin press on the buds themselves instead of an extraction with solvents.
4 Likes