LilJonB's Hopscotch Grow

your plants are looking very good :slight_smile: they had a very good green color to them

all the best in your grow

be safe and stay free

Dequilo

6 Likes

It also helps with stress too

1 Like

All the hydro folks. When you top off your reservior do you top off with just water only to keep your PPM/EC in check. Making it lower to make a transition into flower or just lowering the PPMs/EC.
The reason I ask is that Iā€™m topping off and adding nutes. The plan is to top off with nutes then top off with water next time. After that it should be time to start the full bloom ratio.

1 Like

Man tell me about it :rofl: Iā€™ve also ran just 1 auto in a DWC andā€¦ it wasnā€™t great :joy: same thing you said, first too hott, then too weak, finally got it mostly right by the time flower startedā€¦ at 8 inches tall. Still pulled 35grams dried :joy:

I have been experimenting with the adding back method. I always drained and refilled my dwc every two weeks or so and was usually fun times with sterilization. But Iā€™ve always heard of guys just topping off the whole grow and never draining the res. So thatā€™s what Iā€™ve been doing now with the flood and drain setup I built. Iā€™m adding back water with full nutes. And maybe some extra ph down. So far ppms arenā€™t spiking or anything so think weā€™re good for the time being.

Big issue Iā€™ve found is if/when the ph of the res starts tanking when itā€™s totally full, thatā€™s for sure drain and refill time. Donā€™t wanna be adding PH UP too.

2 Likes

Yeah my girl drank so fast I just keep adding h2o and nutes back in. Never changed the whole grow. Just made sure my ph was good.

2 Likes

Thatā€™s not to bad. But ant it supposed to be better? Like at least 2 oz.? Itā€™s my second time running autos so I donā€™t personally know. My knowledge is just from what Iā€™ve read. The first time was GG4 auto from Herbies. It burnt up even when I cut the FFOF with coco. 2 parts coco, 1 part FFOF. I just would think it being grown in DWC you should have gotten more. Iā€™m glad I did a test run with these Hopscotch to get a feel for how they grow. I might find 3 Rubbermaids for each strain. 3 plants each so I will be able to cull one plant in each container if I want to run regular seeds.
When I top off with just water I check my PH first because if the PH is low I wonā€™t add PH down unroll after. No sence in fighting yourself.
Now I touched base before on my previous thread and bring it up again about EC/PPM levels and what it means if drops or rises after your original reading.
ĀæIf youā€™re EC/PPMs drop then it tells you that your plants is feeding more so you can add more to your feed when you top off?
ĀæIf youā€™re EC/PPMs are higher then your original reading it means that your plants is leaving nutes behind. This can mean a couple of things. I know one is you need to back off you nutes obviously. I think the other reason has to do with bad things are going on with your roots.
Hey @JoeCrowe can you touch base on this a little bit please?

1 Like

they are going to just love me outside this year :wink:

2 Likes

Your starting them inside first so that will make them a lot easier. I know they donā€™t like being topped or transplanted. I got faith they will do good. If they came from @ReikoX they should be more resilient plants. I would like to try some of his gear.

If the ph drops and the EC rises, your plant is dying. If you refill the bucket with water and the EC has dropped since yesterday, things are doing great.
I experiment with the dose until I have the right EC levels min/max determined. Then I play within those limits. It can be very different with different plants, but it can also be exactly the same.
geranium - EC 2.0 - 3.2
meat breath - EC 1.4 - 3.2
hehheh you get the idea, right?

2 Likes

I know exactly what you mean. I just knew you would be able to explain it better. I know that when the EC readings are higher could mean multiple things bad things.
Is there any good books about growing cannabis in hydro. It doesnā€™t have to necessarily hydroponics. Thereā€™s a book @ReikoX recommended on his old seed cracking experiment that look like it covered just about everything. It seemed to be more advanced reading material. A lot of books are focused on attracting beginners.

I read books on botany and watched bugee. I find lots of things in the ā€œcannabisā€ growing sphere is broscience/oldwives. Itā€™s just another stupid plant. lol! Probably an offensive comment right there :wink:
Organics I prefer elaine ingham, sheā€™s the bug lord.

4 Likes

What I learned is that autos require a quarter of nutes that photos require. That was the common theme in multiple sources as I gathered information for my first outdoor auto run last year.

2 Likes

Dang l. That would mean 1/4 dose of the recommendation on the lable. I think that is how will run them for the first 2 weeks. I was at about quarter dose 3 days ago last week and it was showing N deficiency.
You are absolutely right. Especially starting this Blueberry from Mark. I will definitely start off with them 1/4 and every few days add a ml of nutes to the res. I think sheā€™s liking what shes got right now. 875 PPM. She will start getting just water here soon to bring them back down so next week I can slowly start introducing her to her flower nute ratio.

2 Likes

Yeah supposed to be a lot better, I never did get her totally right, but I figure not bad for a <1ft plant :sweat_smile:


Was a Northern Cheese Haze from Mephisto

10 Likes

Looks nice. See Iā€™m in the same boat. If I knew some of my plants turn out as some do sometimes I would have added more. Nice insulation. Dose that work good. Iā€™m looking for something to go straight across the bottom half of my tent. Like another room. I wouldnt need a chiller then for sure.

1 Like

Eh, donā€™t think it helped on temps. This was the one res I had that was hitting ~74, possibly higher, and going sterile kept her going till the end through it all. The aluminum tape was mainly to block the light from getting into the res :wink:

1 Like

Oh. I thought it was like a thin sheet of something. I see that it tape now. Iā€™m used to the plain stuff.

1 Like

I wonder if something like a space blanket or hot water heater insulation might work at keeping temps stable.

1 Like

Good tip on the cow! I might have to try that out myself. I saw my local hydro store had those shale canisters you just fill water with but Iā€™ve never heard any reviews on them.

1 Like

Exactly where my mind was at. On the money! Pand film would work. I would have to run a separate inline to the top to give that top of the tent air. All the vents are at the bottom.
I donā€™t think a heater is necessary.
Edit: Heater Insulator. I see it now. That would work too.

PVC would be a great way thatā€™s not permanent to run air to the top half of my tent. It can easily be taken down if i donā€™t need it.

Bud Candy. Is that used for hydro? Is it worth using?